Model ANW-2000 is a small independent cubicle suitable for mounting on the wall, pump house, MCC or any other location where, free standing panels are not available.

It can meet for additional requirement of annunciator points, arise during commissioning or expansion programme. It is a self sufficient annunciator complete with facia windows, power supply unit, push button and hooter for audible alarm. The enclouser is suitable for outdoor locations in dust and weatherproof construction. Special type of enclouser for IP-54 or IP-55 also can be supplied. All the operational sequences and supply voltages given under ANA-2000 model are available with ANW-2000 model.

Model ANP-2000 is a free standing floor mounting panel comprising of logic modules, power supply units, terminals etc with or without facia display. It is generally in dust and vermin proof construction, finished with seven tank process of pretreatment and painted with suitable shades of stoving enamel paint, as per IS-5. Cable entries can be from top or bottom. If required, panel can be fabricated with IP-54 or IP-55 degree of protection as per IS.

Model ANA-2001 series is introduced for compact dimensions and economy. It is an integral unit with smaller windows, fixed power pack, plug-in type quadruplate module cards and FRC connectors, It can be supplied for 10 to 60 windows per cabinet in various configurations. Suitable for various supply voltages such as 24V DC, 110V/230V AC and 110V / 220V DC. Each window is of 55mm (L) X 30mm (H) dimensions snap fitted with photographic legend film and two acrylics for backlighted display. Twin lamps per window with biasing resistor for lamp protection. The operational sequences available are auto reset and manual reset.